Study by TPU scientists reveal waste-based fuel can help in reducing toxic emissions of thermal power plants

Scientists from Tomsk Polytechnic University and Ural Federal University (UrFU) have demonstrated the high environmental efficiency of fuel for thermal power plants based on a mixture of various types of waste. According to the authors, the use of such fuel compositions instead of coal can reduce harmful oxide air pollution by 70%.

The use of fossil fuels in the ever-increasing global energy demand generates large amounts of gas and solid emissions into the environment, the TPU scientists said. According to the International Energy Agency, the combustion of fossil fuels causes over 90% of the world’s pollution with sulphur and nitrogen oxides, which cause acute diseases of humans, animals and plants. Moreover, 60% of this amount accounts for coal.

One solution to address this crisis is the introduction of water-containing slurry fuels based on coal and oil by-products, municipal solid waste, wood waste and other biomass, the scientists said. According to the researchers, such compositions could be used at thermal power plants instead of conventional energy sources such as coal and fuel oil.

The research conducted by TPU and UrFU scientists showed that sulphur and nitrogen oxide concentrations during the combustion of fuel compositions can be reduced by 70% compared to coal combustion.

“The use of fuel, based on waste and industrial by-products, not only reduces the load on the environment but also enables to recycle large volumes of accumulated waste, involving unused but energetically promising raw materials. Moreover, it helps to conserve non-renewable fossil fuels,” Galina Nyashina, Teaching Assistant of the TPU Research School of High-Energy Physics, told Sputnik news agency.

The scientists also determined the presence of water vapour in the combustion zone of the thermal installation contributes to the conversion of some sulphur and nitrogen into inactive forms incapable of forming oxides, which further reduces the pollution level.

The research findings were published in the Science of The Total Environment academic journal.

The research team intends to continue studying the chemical and physical combustion processes of fuel compositions based on hydrocarbon raw materials and waste to further improve them.

Fibre-optic sensors could help control the quality of roads

Researchers from Saint Petersburg Electrotechnical University ETU “LETI” and Riga Technical University tested new technology for monitoring the state of the roadway surface. Fibre-optic strain and temperature sensors collect data on changes in the roadway structure depending on the load. This information will help design durable roads and plan their maintenance. The study was published in the Journal of Sensors.

The pavement of any road deteriorates over time. It is impossible to stop this process altogether, but it is possible, on the one hand, to choose more durable materials and, on the other hand, to repair cracks and ruts in the roadbed structure in the early stages, until the damage requires replacing the entire surface. Therefore road construction industry is always looking for effective monitoring systems along with new materials. Roads should be equipped with sensors that allow not only to detect defects timely but also estimate the load on the road section. Using this information, a maintenance team could understand the levels of pressure and vibration created by traffic in that area and reinforce the roadway surface where needed.

Dmitry Redka, Associate Professor of the Department of Photonics of ETU “LETI,” used fibre-optic sensors for asphalt pavements in a joint project with Riga Technical University. TThese devices are known for their sensitivity and can be arranged in existing fibre optic networks to remotely collect data, so they do not require an electrical power supply. The sensors are based on the so-called fibre Bragg grating. It is a short segment in an optical fibre in which the refractive index is variated using UV light. As a result, this segment always reflects radiation only in a very small spectrum and transmits the rest of the light without loss.

FBG can be constructed so that the wavelength of the reflected light depends on changes in the ambient temperature, pressure on the fibre, or other parameters. Fibre optic sensors work thanks to this effect. For example, a temperature sensor will reflect a laser signal differently at +20°C and -15°C.

Dmitry Redka, Associate Professor of the Department of Photonics of ETU “LETI,” explains: “Our experiments show that fibre optic sensors can accurately measure roadway deformations. It is necessary to monitor the temperature because, in warm weather, asphalt is more pliable, and strain values increase. Using our constant monitoring approach, one could determine when deformations exceed the limit in a section and take it into account when designing new roads and repairing existing ones.”

Researchers embedded two types of fibre-optic sensors for measuring strain and temperature in a layer of asphalt on a Latvian road during its maintenance. The sensors were placed 25-30 mm deep at two points on one side of the roadway. Because unprotected fibre-optic sensors are fragile, they were encased in composite and ceramic tubes.

To test if the system is working, researchers used a falling weight deflectometer, a device measuring the surface deflection under load. The centre of the plate, on which the load falls, was placed at different distances from and directly above the sensors. This test showed that the most accurate measurements are possible when the load is directed right on the sensors. That is why in real-life monitoring, it is essential to consider the direction of traffic. Scientists also verified that temperature plays a major role in the deformation of asphalt: all measured values were lower in fall than in warm summer.

A key part of the experiment was monitoring actual traffic. About 3.15 million cars pass through the point where the measurements were taken in a year, and over 23% of them are heavy trucks. Physicists determined which types of trucks impact the roadway the most and calculated that in 33% of cases, a passing truck deforms the asphalt by 0.3 mm per meter.

TPU Opens Research Center for Petrochemistry and Technology

Tomsk Polytechnic University (TPU) has opened a new subdivision based on the School of Earth Sciences and Engineering. The subdivision will unite a wide range of research areas and will allow carrying out more works for the benefit of industrial partners of the university.

According to Natalya Guseva, Director of the TPU School of Earth Sciences and Engineering, the opening of a new centre in the structure of the School and the reorganization of the Innovation Research Laboratory for Drilling, Washing and Slurry Solutions are caused by the development of staff’s competences.

“At the moment, the laboratory staff work in new research areas and can solve a quite wider range of tasks. It will allow the TPU School of Earth Sciences and Engineering to enhance cooperation with industrial partners and positioning on the market for services, as well as to take part in more large-scale projects, where different competencies are required,” Natalya Guseva says.

Konstantin Minaev, Head of the Innovation Research Laboratory for Drilling, Washing and Slurry Solutions, will lead the new centre. The subdivisions of the centre are located in the TPU academic buildings No. 2, 19 and at the TPU Science Park. JSC Tomskneft VNK, an industrial partner of TPU, contributed to the renovation and re-equipment of premises in academic building No. 19.

“First of all, I would like to thank all the team, as it is a serious step on team building for solving serious tasks at the frontier of the petroleum industry. The centre opening will allow expanding the range of research and engineering works in petrochemistry due to the new and up-to-date equipment, interdisciplinary contacts and query enhancement from industrial partners. It is a reply to the question on breaking down barriers among university laboratories. The most important is that the Center opens additional opportunities for students: they can choose a trajectory, come to the place where new projects are born, use the newest equipment,” Andrey Yakovlev, Acting Rector of TPU, said at the center opening.

The Research Center for Petrochemistry and Technology will unite five areas: oilfield chemistry, drilling fluids, slurry solutions, reservoir physics, the chemistry of petroleum and petroleum products. The skeleton staff is the laboratory staff, however, new experts, as well as young scientists: graduates and postgraduates, including international ones, will be invited.

“We can carry out large-scale projects, we possess accumulated experience that will allow us to holistically solve serious tasks both in a research area and for industrial partners. I am sure we will have interesting work ahead,” Konstantin Minaev, Head of the Center for Petrochemistry and Technology, addressed the staff.

The Center is planned to carry out both research and industrial projects, however, the key point will be focused on cooperation with industrial partners. To equip the Center on the program of renewal of instruments, there was purchased high-class equipment including a rheometer and tensiometer worth over 15 million rubles.

There was no equipment of such level for research in oilfield chemistry at TPU. It will allow our staff members to become participants of more serious projects for the benefit of industrial partners and will allow our students to master the devices during their study time,” Konstantin Minaev explained.

In total, there was spent over 70 million rubles during several years for installation and purchasing miscellaneous equipment for different units of the Center.

“Today, we see the result of the cooperative path that was travelled by our laboratories in approaching and building relations with each other. At the moment, different subdivisions can say that they can implement large-scale projects for the industry,” Artem Boev, TPU Vice-Rector for Technological Development and Entrepreneurship.

Russian and Italian scientists discover new substance that can kill cancer cells

Specialists of the Center of Medical Chemistry of Togliatti State University in collaboration with colleagues from Saint Petersburg State University and University of Florence (Università degli Studi di Firenze) have found a new pro-apoptotic agent – a substance capable to suppress the growth of malignant tumours.

In March of this year, the specialists of  TSU, SPbSU and UoF conducted a joint research study that resulted in new chemical substances from the group of sulfonamides that inhibit the activity of carbonic anhydrase (CA).

Carbonic anhydrases (CAs) – is an important class of enzymes in the human body that are responsible for the regulation of various physiological processes, ensuring the constancy of the internal environment of the cell in terms of CO2 level and pH –balance. A cancer cell, unlike a normal one, has various mechanisms for survival, one of them being an increased expression of carbonic anhydrase.

In an unfavourable environment, a cancer cell begins to intensively express (synthesize) carbonic anhydrase on its surface, which “acidifies” everything around, killing healthy
cells and creating conditions for tumour growth.

In search of new carbonic anhydrase inhibitors, scientists from two countries received an unexpected result.

” This time we tried a new class of inhibitors, which should have had a slightly different
mechanism of carbonic anhydrase inactivation. Unfortunately, our substances did not work according to this mechanism, but it turned out that one of the compounds had an activity that did not correlate with the activity of carbonic anhydrase. This is how we discovered a new pro-apoptotic agent – ” Alexandr Bunev, director of the Center for Medical Chemistry, said.

Apoptosis is one of the most conservative mechanisms of cell death, which is necessary for maintaining cellular homeostasis*. In a normal cell, it is triggered in the case of some disorders or damage, while the cancer cell does everything to suppress apoptosis.

” A cancer cell does not need apoptosis, on the contrary, it acquires some resistance to this
process due to incorrect mutations and divisions. From this point of view, apoptosis inducers – chemicals that can affect also tumour cells and induce (cause) apoptosis in them – represent a fundamentally interesting mechanism of action in modern antitumor, including targeted drugs, ” Alexander Bunev explains.

Scientists conducted a series of tests to confirm that under the influence of the new compound, cancer cells entered deep apoptosis. Studies have also allowed experts to assume that the resulting substance is able to intercalate (penetrate) into Deoxyribonucleic acid (DNA).

This gives a certain failure in the division, and the cell is forced to go into apoptosis, even if it has some algorithms for bypassing it, –Alexander Bunev says.

The results of the scientists’ joint work from Togliatti, St. Petersburg and Florence are published in the European Journal of Medical Chemistry (Q1), which provides coverage to
the original research works in the main fields of medicinal chemistry.

Experts in Industrial Design, Photonics and Ecology work with finalists of Urban Greenhouse Challenge at TPU

The finalists of the Urban Greenhouse Challenge: Reforest, an international competition of students held at Tomsk Polytechnic University this year, have been working on their projects jointly with their mentors.

It is the first time Urban Greenhouse Challenge: Reforest has been held at a Russian university. Tomsk Polytechnic University became its main organizer. The key task of the contestants is to develop a project of a city farm, an autonomous greenhouse for growing coniferous and deciduous seedlings on multi-tiered shelving units. The prize pool of the competition is $10,000.

Over 20 teams from 12 countries took part in the selection round of the competition. Ultimately, the expert jury selected the 10 best projects. These projects include teams from Tomsk, St Petersburg, Moscow, Voronezh, Kazakhstan, Novosibirsk and other cities.

“Our teams are working with their mentors individually. The experts are answering their questions, holding video consultations. Based on the results of this cooperation, the contestants are polishing and fine-tuning their projects, as well as are preparing final presentations. The mentors include representatives of our industrial partners, which is very appreciable. We are pleased that our contestants possess an opportunity to receive their consultations and adopt the professional experience in the convenient format for them,” Maxim Volkov, Head of TPU International Cooperation Division, says.

For instance, the contestants can ask questions on industrial design, photonics, automation, biology, horticulture and plant nutrition, ecology and recycling technologies. The mentors include representatives of Schneider Electric, the world expert in energy management and automation with branches in over 100 countries and iFarm, a Russian company creating vertical farms.

New study by St Petersburg University can help better understand the mechanism of neurodegenerative diseases

Researchers from St Petersburg University have created a new theory of diffusion NMR experiments to study amyloid fibrils. Fibrils are one of the key factors behind various forms of dementia, including Alzheimer’s disease. Based on this theory, the researchers showed that using a diffusion filter it is possible to separate the spectral signals of fibrils and other components of the amyloidogenic sample and obtain their individual spectra, which has been considered impossible for a long time. An article with their research findings was published in one of the most prestigious peer-reviewed chemistry journals Angewandte Chemie.

Application of the diffusion filter in a sample containing Sup35NM amyloid fibrils and proteolytic fragments. Data obtained in the Resource Centre ‘Magnetic Resonance Research Centre’ of the St Petersburg University Research Park

Alzheimer’s disease is the most common neurodegenerative disorder in which neurons gradually die off, leading to dementia. The exact mechanism and causes of this disorder have not yet been identified. However, it is known that amyloid plaques form in the brains of patients. Plaques consist of amyloid fibrils, which are special filamentous assemblies formed by amyloid proteins.

‘The number of patients with neurodegenerative disorders will continue to grow in the future. Thanks to the success of humanity in the treatment of cancer and cardiovascular diseases, more and more people are living into their 80s. At this age, the risk of developing neurodegenerative disorders, including Alzheimer’s disease, becomes very high. Unfortunately, no cures for these diseases have yet been found’ says Nikolai Skrynnikov, a co-author of the research, Ph.D., Professor, Head of the Biomolecular NMR Laboratory at St Petersburg University.

According to Nikolai Skrynnikov, scientists have deciphered the structural features of amyloid deposits relatively recently. However, a more detailed study of amyloidogenesis is faced with a number of difficulties. In particular, this is because in brain tissues amyloid fibrils coexist with other structural forms of amyloidogenic protein. These are monomers, proteolytic fragments, and various oligomers, some of which serve as ‘seeds’ for building new fibrils. Analysing such a mixture is a major challenge. For example, when studying amyloidogenic samples by means of nuclear magnetic resonance (NMR) spectroscopy, one obtains a multitude of signals that originate not only from fibrils that are of interest to scientists, but also from other protein species. Experts are therefore looking for ways to separate the spectral signals of fibrils and other concomitant structural forms.

The most obvious and straightforward method to achieve this goal is the so-called ‘diffusion filter’. This is a special NMR experiment that makes it possible to separate signals from heavy fibrils and other more mobile components of the sample. However, about ten years ago scientists from Cambridge University published two articles in which the feasibility of such a filter for samples of amyloid fibrils has been put into question. After that, the research in this field has come to a halt.

‘The motion of a fibril can be likened to random motion of a log on the surface of a lake, while the motion of a monomer is like that of a pine needle. The researchers from Cambridge argued that the rotation of the log might be faster — while turning, the linear speed at the ends of the log proves to be sufficiently high. For this reason, according to the authors, it becomes impossible to distinguish between a rapidly turning log and a nimble needle,’ explains Nikolai Skrynnikov. ‘But this is far from the truth’.

The scientists from St Petersburg University put the assertion of their Cambridge colleagues to a rigorous test, and not only disproved it, but also created a new theory of the diffusion NMR experiment. Moreover, the researchers described the essence of the effect by three methods: the analytical method, i.e. by deriving a compact formula that reflects the outcome of the experiment; the numerical method, i.e. by solving certain differential equation by means of a suitable numerical algorithm; and the Monte Carlo method, i.e. by using computer simulation to capture random fibril movements in solution. All three methods showed virtually identical results, thereby validating the new theory.

For the experimental verification of the new theory, the researchers have turned to yeast protein Sup35, which is known to have amyloidogenic properties. Scientists from St Petersburg University played a prominent role in the early studies of this protein. Professor Sergey Inge-Vechtomov, his students and followers were among the first investigators of Sup35. The research team from the Biomolecular NMR Laboratory at St Petersburg University together with the scientists from the University’s Department of Genetics and Biotechnology used Sup35 as a model system to demonstrate that the use of a diffusion filter in samples containing amyloid fibrils is indeed possible. The researchers successfully obtained a spectrum of fibrils, ‘cleared’ from other spectral signals.

Electron micrograph of Sup35NM fibrils. Data obtained in the Resource Centre ‘The Centre for Molecular and Cell Technologies’ of the St Petersburg University Research Park

‘Twenty to thirty years ago, scientists had little understanding of what happens in the human brain with the onset of dementia. Gradually, knowledge has been accumulated and new research methods have been developed. Thanks to these methods, we now know about the existence of amyloid deposits and have a fairly detailed idea of their structure,’ notes Nikolai Skrynnikov. ‘Our theory and its proof is a contribution to the body of fundamental knowledge that medicinal chemists rely on in their search for new drugs. In the future, our proposed diffusion filter for NMR experiments in amyloidogenic systems may help in this search.’

The university’s research team comprised of Boris Kharkov, Postdoc, Research Associate, the Biomolecular NMR Laboratory, Ivan Podkorytov, Deputy Head of the Biomolecular NMR Laboratory, Stanislav Bondarev, Research Associate, the Department of Genetics and Biotechnology, Mikhail Belousov, Junior Research Associate, the Department of Genetics and Biotechnology, Vladislav Salikov, a doctoral student, the Department of Nuclear Physics Research Methods at St Petersburg University, Galina Zhouravleva, Professor, the Department of Genetics and Biotechnology, and Nikolai Skrynnikov, Professor, Head of the Biomolecular NMR Laboratory.

TPU develops device with nanosensors for detection of early signs of sudden cardiac death

Scientists of Tomsk Polytechnic University have developed a nanosensor-based hardware and software complex for the measurement of cardiac micro potential energies without filtering and averaging out cardiac cycles in real time.

The device allows registering early abnormalities in the function of cardiac muscle cells, which otherwise can be recorded only during open-heart surgery or by inserting an electrode in a cardiac cavity through a vein. Such changes can lead to sudden cardiac death (SCD). Nowadays, there are no alternatives to the Tomsk device for a number of key characteristics in Russia and the world.

The research findings of four-year measurement of cardiac micropotential energies using this device and the participation of a volunteer are published in Measurement academic journal (IF: 3,364; Q1).

The heart permanently generates electrical signals. These electrical signals cause cardiac muscle contraction and help the heart to function as a pump. Based on the form and duration of these pulses, it is possible to assess the condition of the heart. The main method of detection of electrical pulses, that is used everywhere, is electrocardiography (ECG). Nevertheless, ECG modern devices detect already critical changes in the function of the myocardium, cardiac muscle.

“Therefore, there is much concern about the creation of devices for early detection of these disorders, when it is still possible to restore cell function using medication and without surgical intervention,” Diana Avdeeva, Head of the TPU Laboratory for Medical Engineering, a research supervisor of the project, explains.

“To implement this, it is required to record cardiac micro potential energies, electrical pulses emitted by separate cells. Here, there is a question of how to implement it noninvasive. Our research team have worked on this task for a long time, as a consequence, we jointly with the participation of our colleagues, doctors, have developed a hardware and software complex,” she continues.

“The core principles of its operation are similar to ECG, however, we changed sensors: we made nanosensors instead of conventional sensors and managed to measure signals of nanovoltage and micro voltage layers without filtering and averaging out in broadband. The use of nanosensors led to the necessity to apply original circuit solutions, write individual software, Ultimately, we gained a tremendous difference in sensitivity,” Diana adds.

The complex consists of a set of sensors, a tiny key device for recording incoming signals from sensors and software for data processing. The sensors are fixed on a human’s chest using a conventional conducting gel. The monitoring procedure takes about 20 minutes.

Conventional ECG machines operate on frequencies from 0,05 Hz to 150 Hz, while the device of the Tomsk scientists operates on frequencies to 10,000 Hz.

Silver chloride electrodes are usually used for recording ECG of high quality. Our sensors are also silver chloride electrodes, however, we used silver nanoparticles. There are up to 16 thin plates from porous ceramics in every our sensor, silver nanoparticles are placed in these pores. There are millions of particles in one sensor, where every particle is a silver chloride electrode capable to enhance an electric field of the heart. Silver and gold nanoparticles are capable to enhance an electromagnetic field: visible light by 10,000 folds and infrared radiation by 20 folds. We also refused to use filters for rejection network interference and noises, which are usually used in conventional ECG and significantly distort micropotentials,” Diana Avdeeva says.

The published article represents the monitoring data of one volunteer’s heart function. He took part in research for four years and was monitored every 7-10 days.

“At the beginning of our research, we recorded clear violations of activity of cardiac muscle cells. His attending physician recommended surgery, he gained an inserted stent at the Cardiology Research Institute. Then, he continued to take part in the research and the device recorded the further gradual restoration of cardiac function,” the scientist notes.

Previously, the project received sponsorship of the Technology Platform “Medicine of the Future” and the federal targeted program. The complex was created in partnership with experts of the Cardiology Research Institute of the Tomsk National Research Medical Center of the Russian Academy of Sciences. The industrial partner was the Scientific Production Association Ekran, a Moscow enterprise.

“A task to create a sensitive, tiny and affordable complex was set up, in order in a long run, outpatient clinics and patients at home could use it. Moreover, the developed methods and devices can be used not only in cardiology.

The fields of any electrophysiological research, such as electroencephalography, electromyography and so on are promising. Of course, before applying it to cardiology, we have to pass some essential stages. These are the collection of the required array of statistics, certification of the complex for medical use. All these stages require sponsorship, we are engaged in searching for partners and supporting programs,” Mikhail Yuzhakov, Engineer of the TPU Laboratory for Medical Engineering, a participant of the research team, says.

LETI developes a new function to verify encrypted messages

Researchers of ETU “LETI” and Aristotle University of Thessaloniki have created a new algorithm for constructing hash functions. Taking advantage of chaos theory and adaptive symmetry, the scientists made it harder to break than existing solutions. The results of the study are published in the Chaos, Solitons & Fractals journal.

A hash function is a mathematical function designed to convert some message or data, such as a password, into a bit array called a hash. This way, the system processes code that is unique to each message. It is essentially a way to verify encoded messages, impossible to decrypt unambiguously. For example, when we enter a password in a system that uses hash functions, the server receives not the text of our password itself but its bit array. If it matches the sequence on the server, then we log in to our account. The point is that if intruders intercept our message, they won’t get the plain text of our password but the bit array, which they won’t be able to decrypt correctly.

Hash functions are used in many areas: data encryption, electronic signatures, cryptocurrencies, data sorting and compression. In modern cryptography, one of the most promising areas is chaotic hash functions based on chaos theory. This theory describes the dynamics of nonlinear systems in which changes in initial conditions lead to unpredictable consequences. Such systems include mechanical devices like a double pendulum, atmospheric phenomena models, population dynamics, and even some social processes. But since we need as random a sequence of bits as possible for hashing data, the use of chaotic systems with confusion and diffusion property facilitates this process, enhancing data security. The researchers from ETU “LETI” studied existing chaotic hash functions and developed their improved version.

“Unlike other solutions based on classical chaotic maps, we used modifications with adaptive symmetry. The use of discrete maps with controlled symmetry expands the key space and, consequently, the cryptographic strength of the obtained hash functions. The symmetry of the maps becomes an additional key in their construction while having little effect on the chaotic behavior of the system,” says Alexandra Tutueva, a Ph.D. student at the Department of Computer Aided Design Systems of ETU “LETI.”

After constructing the hash function, scientists have tested it thoroughly. Like any other counterparts, it must have certain properties of cryptographic hash functions. First of all, the authors analyzed the performance – how quickly the input data (keys) is converted into a bit array and back. For comparison, they used the known standard SHA-3 (Keccak) hash function and several currently existing chaotic functions. The development of ETU “LETI” researchers showed a speed of 0.9 Gbit/s, comparable with analogues.

The function also successfully passed the birthday attack test. This method is used in cryptanalysis to break ciphers. It is based on the birthday paradox. For example, in a group of 23 people, the probability that two of them will have the same birthday is greater than the probability that each of these people will have unique birthdays. That seems counterintuitive, but the math shows otherwise. Using this paradox, attackers try to discover the same bit arrays for two different source messages. So scammers using hash functions can send one contract to sign with e-signature, but the victim will end up signing two contracts with different contents at once. However, the scientists have established that for the new function it is enough to generate messages of at least 128 bits in length to prevent the attack. This way, the probability of a bit array match is minimized.

The authors also confirmed the avalanche effect of the function. It means that changes in the original data lead to changes in hashes. The researchers created a text message and then ran it through a hash function, obtaining a specific bit array. They then changed the length and meaning of the original texts and hashed those messages. The result was completely different bit sequences, indicating that the function worked correctly.

The new chaotic hash function passed all the tests and showed its reliability and efficiency. According to scientists, it can be used in cryptography as a more secure version of data transmission. Also, the new function can be the basis for a mechanism that creates realistic models of objects of fractal structure in computer graphics and solid-state modeling – for example, for the generation of clouds and mountains, the surface of the sea, the tensions within solids, and much more.

TPU acquires reactor operation license for 10 Years

The TPU IRT-T Nuclear Research Reactor has extended an operation license for another 10 years.

“License acquisition from the Federal Service for Environmental, Technological and Nuclear Supervision (Rostechnadzor), a supervisory body, is always a very complicated process, especially when it refers to such a long-term period. We submitted the document set proving installation safety for approval in 2019. After that, the Federal Service for Environmental, Technological and Nuclear Supervision commissioned a formal safety assessment that was conducted by the expert organization. These works lasted about nine months. As a result, we received expert findings including all remarks and recommendations. Ultimately, we acquired a license,” Artem Naymushin, Head of the TPU Nuclear Research Reactor, says specifying that an operation license was initiated by the order of TPU Rector Andrey Yakovlev.

“We are deeply thankful to the entire team of the Reactor taking an active part in all the stages of license acquisition. At the moment, having acquired a license, we will keep improving our work.”

He adds that expert findings include a lot of aspects related to compliance with the requirements of physical protection, nuclear and radiation safety, staff and population protection, and others. Moreover, the Reactor staff prepares annual reports on the condition of the unique research installation for the supervisory body.

The TPU Nuclear Research Reactor is the one operating university reactor in Russia. The regular remanufacturing operations were completed within the Federal Targeted Program for Research and Development in the last year.

The project provided the renewal of the research complex and expansion of functional capabilities through the inclusion of the unique set of global user stations: an experimental automated complex for doping semiconductor materials, a multipurpose complex for irradiation of target samples on extracted neutron fluxes, a gamma-ray laser, an installation for research of interaction of nuclear materials with active gases, a digital spectrometric complex for positron annihilation spectroscopy, a complex for the production of industrial and medical isotopes, a complex for the production of radiopharmaceuticals.

The IRT-T Nuclear Research Reactor is aimed at research neutrons, neutron radiation, objects of the microcosm, conducting fundamental and applied research at the forefront of science. It helps to create new materials and technology in the energy industry, to develop promising medication and technology of nuclear medicine.

Mining University Graduate on how he ended up in Germany

Maxim Vorona, a graduate of St. Petersburg Mining University, moved to Germany more than ten years ago. Over these years, he has advanced to the Deputy CEO at MIBRAG Consulting International, part of the Germany-based coal producer MIBRAG.  

“I always wanted to build a career in mining. My father was a chief engineer at the expedition that explored diamond deposits in Arkhangelsk Oblast, Russia. They worked at the Lomonosov mine, one of the largest diamond mines in Russia and the world, consisting of, for instance, the V. Grib and Pomorskaya kimberlite pipes. He often let me join him when I was on holidays. And as a teenager, I already knew how a drilling rig works or what the term ‘geological prospecting’ stands for.

In 2002 I entered St. Petersburg Mining University, which even then differed from other Russian universities. It had research labs, agreements with industry-specific companies on internships and work placements. Finally, its graduates had high employability. All these factors combined plus my knowledge and skills earned me the job position I’m in now,” says Maxim.

In his fifth year, the soon-to-be graduate competed for a one-year internship at Freiberg University of Mining and Technology and won. Leaving abroad for internships is a common practice in Russia nowadays, offered by many higher institutions. Back then, the programme, co-funded by the Russian Ministry of Education and the German Academic Exchange Service (DAAD), was gaining momentum. Only one postgraduate student and one undergraduate student were chosen. They went to Saxony, lucky to have been provided with an opportunity to study in Germany and collect data for their theses.

“I indicated that I wanted to study milling machines. Back then, I did not know German and had only English to rely on. I was helped, however. Half a year later, Professor Carsten Drebenstedt, who was lecturing to us, called me in. He is an internationally acclaimed scientist with vast knowledge of open-pit mining, then serving Vice-Rector for Research at Freiberg University of Mining and Technology. He suggested I undertake an internship at Rheinkalk, which I did.

This company is part of the Lhoist Group, the world’s largest producer of lime and dolomite. Lhoist planned to utilise milling machines at one of their deposits because of switching over to an extraction technique not involving blasting. During the next three months, I personally participated in the tests done at the quarry. Upon their completion, I compiled a detailed report, which included data on economic efficiency and technical characteristics, and presented it to the commissioner,” recalls Maxim.

As a result of the Mining University’s student staying in Europe, his studies lasted a year longer than initially expected. This is not unusual in Germany, as well as in many other European countries. Both postgrads and undergrads intentionally look for and readily agree to lengthy internships, typically done abroad. Thereby the future engineers acquire additional competencies and at the same time gather material for research articles.

In contrast to the Russian educational system, the German one favours such an approach. It allows students to be more flexible when deciding which course to take and when to take it. The downside is that many do not complete their master’s degrees until becoming 26-27 years old. 

 

As the internship had come to an end, Maxim returned to St. Petersburg to present his thesis. Shortly after finishing his education at Mining University, he returned to Freiberg – this time, to pursue PhD studies.

Upon graduation, Maxim was approached by several companies. He decided to take his chances on MIBRAG and started as a project manager, gradually moving up the career ladder. By now, he has progressed to the positions of Deputy CEO and Director of Mining.

  

“When I took the job, the corporation needed people with a deep understanding of the market. Aside from being highly qualified engineering specialists, they had to be familiar with trends in the global economy.

My current role is to develop the growth strategy of the business. I also have to ensure that the company will adapt to political or economic changes if they occur. MIBRAG is one of the largest employers in Saxony. And given Germany’s commitment to phasing out the use of coal as an energy source, the level of responsibility is enormous,” notes Maxim.

The Mining University’s graduate rarely visits Russia nowadays. One of the few events he tries to make an exception for is the Russian-German Raw Materials Dialogue, traditionally held in St. Petersburg. Due to the COVID-19 pandemic, it was decided to move it online this year.